Ready to use sprayeable Efflorescence treatment efflorescence is normally caused by soluble salts within building materials,also salts transferred into building materials by dirty and contaminated water.
Left untreated efflorescence can cause corrosive damage to many building surfaces and is also very unpleasant to look at unsightly.
Everbuild Salt Away is a non-Hydrochloric Acid based treatment that removes and treats neutralises unsightly efflorescence from most common mineral masonry surfaces.
Salt Away Benefits & Uses:
Salt Away can be used on walls, driveways, floors and patio areas etc.
including bricks, stone concrete flag stone masonry surfaces.
Quick and easy to apply bio-degradable safe formula.
Available in bottles or as a ready to use spray.
Water clean up and can be poured, sprayed or brushed on.
Salt Away Approximate Coverage:
8 to 10 meters square per litre depending on the surface
Remove any loose surface dirt and debris
Always test a small inconspicuous area prior to full application.
Dampen the surface to be treated with water do not flood, spray or pour Salt Away onto the affected area ensuring complete coverage.
Take care not to overspray onto surrounding areas particularly metal surfaces, lawns and plants
Leave Salt Away for 5 to 10 minutes depending on levels of efflorescence.
Wash down area with clean fresh water.
Repeat if necessary for badly affected areas.
In order to help prevent further efflorescencere appearing walls and floors can be treated using Everbuild 402 Waterseal or Everbuild 408 Super seal, Paths & patios with 409 Block Guard or Path & Patio Seal.
Important Product Information:
Always test a small inconspicuous area prior to full application
Do not use on artificially coloured stones blocks or pavers.
Wash off any over spray immediately with clean fresh water.
Always use read the data sheets
Salt1 Data Sheets:
Everbuild Salt Away Technical Data Sheet
Everbuild Salt Away MSDS Safety Data Sheet
Manufacturer Everbuild Salt Away Product Page