BESTWAY 58486 FLOWCLEAR SAND PUMP 3000GAL

BESTWAY 58486 FLOWCLEAR SAND PUMP 3000GAL

BESTWAY 58486 FLOWCLEAR SAND PUMP 3000GAL

0243612

Bestway

Every above ground pool needs to be taken care of to ensure lasting longevity year after year, and Bestway® has pool owners covered with a collection of sand filter pumps. These filtration systems ensure an easy and convenient way to keep water crystal clear. By using sand in the filter, pool owners have a long-term solution to keeping dust, dirt and debris out of their pool. Where a filter cartridge may need to be replaced every 2 weeks, silica sand only needs to be changed once every few years.

€ 299.99

Limited stock (Only few left)

Pump’s water flow rate (pump capacity ): 11,355L/h (3,000 gal./h)
Integrate pool system water flow rate (system flow rate):8,327L/h (2,200 gal./h)
Durable, corrosion-resistant filter tank
6-position valve allows for easy filter control
Built-in timer lets you set an automated working period
Top flange clamp design with 360° rotation for quick and smooth installation
Easy-to-read pressure gauge
ChemConnect™ chemical dispenser provides clean and healthy pool water. Built-in dispenser design maintains proper chemical balance by automatically releasing necessary amount of chlorine.
The pre-filter strainer basket is an added mechanism that filters to catch larger particles such as leaves,
hair and dirt. Protects your pump impeller so it continuously runs smoother.
Preassembled for added convenience
Compatible with 3.2cm /1.25''valves using included adaptors
Can be connected to 3.8 cm /1.5'' threaded valves
Works with traditional sand or our highly efficient Polysphere™ product
Compatible with most above ground pools
Sand not included
Required sand size: #20 silica sand, 0.45-0.85 mm, approximately 36 kg
For use with 1,100-66,600 L (300-17,600 gal.) pools
Contents: One sand filter set, ChemConnect dispenser

WARNINGS!

1.The pump is to be supplied by an isolating transformer or supplied through a residual current device (RCD) having a rated residual operating current not exceeding 30 mA.

2.The power source on the wall of building should keep more than 4m away from pool.

3.The pump cannot be using while people are inside the pool. Forbid access of the pool in case of damage of the sand filter.

4.Extension cords can’t be used.

5.Always unplug this product from the electrical outlet before removing, cleaning, servicing or making any adjustment to the product.

6.Don’t plug or unplug the appliance if hand is wet.