BESTWAY 58515 FLOWCLEAR 530GAL SAND FILTER

0226400

The Bestway Flowclear sand filter pump is a great choice to keep your above ground pools clean without additives or chemicals.

The filter pump is based on a natural filtration system: the water is pumped into a tank containing silica sand or Polysphere balls, which soaks up impurities and particles to produce clean water. The ChemConnect dispenser maintains and provides clean, healthy pool water, as the dispenser release provides a stable level of chlorine needed for proper chemical balance. The pre-filter strainer basket is an added mechanism that filters to catch larger particles such as leaves, hairs and dirt. It also protects your pump impeller and helps your pump to continuously run smoother.

This filter pump features a 6-position valve, which can be adjusted in different settings for filtering pool water, closing (stopping water flow), backwash (to clean the sand bed), rinse (for initial startup, cleaning and sand bed leveling), draining water from the pool, and circulating pool water.The top flange clamp design allows 360° rotation for quick and smooth installation. Note: Sand/polysphere balls not included, must be purchased separately.

Pump’s water flow rate (pump capacity): 3,028 L/h (800gal./h)

Integrated pool system water flow rate (system flow rate): 2,271 L/h (600gal./h)

For use with 1,100-18,100 L (300-4,800 gal.) pools

Durable, corrosion-resistant filter tank

Top flange clamp allows 360° rotation for quick and smooth installation

Easy-to-read pressure gauge

Included ChemConnect™ Dispenser maintains and provides clean, healthy pool water. Dispenser release provides a stable level of chlorine needed for proper chemical balance.

Includes a strainer for separating leaves and other rough debris.

Pre-assemble for added convenience

This product works with normal sand convention or with Bestway’s highly efficient Polysphere product (not included)

Required sand size: #20 silica sand, 0.45-0.85 mm, approximately 8.5 kg (sand/polysphere balls not included)

6-Position valve for filtering, closing, backwash, rinse, drain and circulating for easy filter control

Recommended hose size for this product is a diameter 3.2 cm /1.25'' with proper thread size.

Contents:Sand Filter(220-240V~, 85W), Pumps water flow rate 3028L/h(800gal/h), Required sand size: #20 silica sand, 0.45-0.85mm, approximately 8.5kg, Diameter 3.2 cm /1.25 '''''''' hose can be used with sand filter, needs to include thread

€ 159.99

Low stock

WARNINGS!
1.The pump is to be supplied by an isolating transformer or supplied through a residual current device (RCD) having a rated residual operating current not exceeding 30 mA.
2.The power source on the wall of building should keep more than 4m away from pool.
3.The pump cannot be using while people are inside the pool. Forbid access of the pool in case of damage of the sand filter.
4.Extension cords can’t be used.
5.Always unplug this product from the electrical outlet before removing, cleaning, servicing or making any adjustment to the product.
6.Don’t plug or unplug the appliance if hand is wet.