Roll over image to zoom in
•Automatic two-way tap programmer.
•Works with 2 AA 1.5V alkaline batteries
•It has an LCD screen for displaying functions (programming, residual time, irrigation duration, rain sensor).
•Instant or delayed start key from 1 to 23 hours.
•Manual opening key (5 minute test).
•Reinforced construction.
•Front panel of two materials.
•Transparent protective cover.
•Insulated electronic components without visible cables.
•3/4 '' tap connector with swivel ring.
•Washable filter.
•Operating pressure 0.1 - 12 atm.
•Ability to connect to the rain sensor.
In stock
•A single water timer with a wide selection of pre-set times to manage two independent irrigation lines with the utmost simplicity, pressing just a few push-buttons.
•Battery-operated, therefore, no electrical connections required: simply screw it onto the tap and it is ready to use.
•You can choose from 19 pre-set programs for all the most common irrigation needs and interrupt them at any time.
•Equipped with backlit LCD screen and practical delayed start function of the selected program.
•Tried and tested for reliable, hassle-free operation, it is fitted to connect with the Rain Sensor device, which interrupts the selected program in the event of rain and starts it again automatically when the rain has stopped.
•Powered by 2 x 1.5 V AA alkaline batteries, fitted in a rainproof socket.
•Easy programming with a single digital button.
•19 preset programmes (+ off ) for each line
| Brand | Claber |
|---|---|
| Barcode | 8000625084852 |
| SupplierItemNumber | 8485 |
| Category | Timers |
| Pressure | 5 bar |
| Inlet Thread | ¾ inch |
| Water Flow | 41 l/min |
| Rain Sensor | Wired, wireless |
| Frequency Of Watering Cycles | 3 per day o 1 per week |
| Programmes | 19 per line |
| Watering Duration | From 00:02′ to 01:30′ |
| Outlets | 2 |
| On Offer | No |